Picture Of Our "CopyMate" Photocopier Payment Controller Board
Allows you to Control a standard
photocopier* to a Electronic Coin Validator like the Mars Cashflow 330. Price of each copy
is set using DIP Switches and only 4 simple connections need to be made between the Copier
and CopyMate. CopyMate is Mains Powered either 120V or 240V and available in two models
(same Board, different Firmware).
Low Value Vend model (1p - 63p Per Copy in 1p
increments) for Black & White Copiers.
High Value Vend model (10p - £6.30 Per Copy in 10p
increments) for Colour Copiers
Please use the part numbers listed below, when ordering.
Euro/Dollar version available on request
Available Only From Brent Electronic On
Phone Number 020 8324 6102
WWW.BRENTELECTRONIC.COM
If you encounter any problems sourcing this item, then please contact me
directly
mark@markscotford.com
Brent Electronic Part Numbers
CopyMate Low Value Vend Model = 65100382
CopyMate High Value Vend Model = 65100384
Mars Cashflow 330 with Low Value Vend Coin Map = 65500754CL
Mars Cashflow 330 with High Value Vend Coin Map = TBA
Click Here To Download The Detailed Pin-Out Sheet For This Board
Click Here To Download The Principle of Operation Sheet For This Version
*CopyMate assumes that the Copier has an Electro-Mechanical Copy Counting Meter. This required signal, can be obtained from other sections of the Copier, for those models not sporting a E/M Meter. Some even have a dedicated "Remote Control" interface which you can use. Because of the sheer number of makes and models of copiers available, we are unable to give help on connecting CopyMate to any particular Make/Model.
www.copymate.co.uk